version:01 28 pf 225m 220m 215m 210m 28m 26m 25m 245m 24m 23m 22m kmb22m thru KMB225M a 50 a -55 to +150 case: mb-s, molded plastic single phase amp surface mount bridge rectifier 50a 2. thermal resistance from junction to ambient 1. mounted on aluminum substrate pc board with 1.3mm mechanical data maximum ratings and electrical characteristics @t a =25c unless otherwise specified single phase, half wave, 60hz, resistive or inductive load. for capacitive load, derate current by 20%. 2 1 of 2 solder pad. note: 0 schottky brrier chip low power loss,high efficiency ideally suited for automatic assembly surge overload rating to peak plastic case material has ul flammability classification 94v - rating polarity: as marked on case mounting position: any marking: type number lead free: for rohs / lead free version, terminals: plated leads solderable per mil-std-202, method 208 2.0 -55 to +150 c = 90c kmb kmb kmb kmb kmb kmb kmb ( note2) 0.1 = 100c v 40 20 v typical thermal resistance per leg average rectified output current ( note1) @t =2.0a 2.0 typical junction capacitance per leg peak repetitive reverse voltage dc blocking voltage a a non-repetitive peak forward surge current 8.3ms single half sine-wave superimposed on rated load (jedec method) i 2 t rating for fusing (t < 8.3ms) forward voltage per element @i f peak reverse current @t a = 25c at rated dc blocking voltage @t a ma 75 c/w rms reverse voltage 60 80 100 14 28 42 56 70 40 20 60 80 100 0.55 0.7 0.85 10 150 105 150 200 140 200 0.92 0.05 5 0.90 type number units operating and storage temperature range operating junction temperature range schottky c 5.0 features kmb 45 31 45 kmb 50 35 50 kmb 250 175 250 t v rrm v dc i o 2 i rm j r ja t r(rms) symbol stg t j i fsm v fm v i c kmb 30 21 30 0.236 6.0 0.213 5.4 0.004 0.012 0.30 0.10 0.179 0.203 4.55 5.15 0.193 4.90 0.134 0.157 3.4 4.0 0.028 0.016 0.7 0.4 mbm 0.051 1.3 0.035 0.9 0.106 2.7 0.091 2.3 0.106 2.7 0.091 2.3 0.177 4.50 dimiensions in inches and milimeters www.dyelec.com 1f1 thru 1f7 1.0 amp.fast recovery rectifiers features low leakage high current capability fast switching for high efficiency flammability classification 94v - o utilizing exceeds environmental standards of mil - s - 19500/228 mechanical data case: moeded plastic r - 1 terminals: axial leads solderable to mil - std - 202,method 208 polarity: color band dentes cathode end mounting position: any dimensions in inches and (millimeters) maximum ratings and electrical characteristics rating at 25 ambient temperature unless otherwise specified single phase,half wave,60hz,resistive or inductive load for capacitive load derate current by 20% type number symbol fr101 fr102 fr103 fr104 fr105 fr106 fr107 unit maximum recurrent peak reverse voltage v rm 50 100 200 400 600 800 1000 v maximum rms voltage v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v average rectified output current (note 1) @ta=75 i o 1.0 a peak forward surge current 8.3ms single half sine - wave superimposed on rated load (jedec method) i fsm 30 a forward voltage @if=1.0a v fm 1.3 v peak reverse current @ta=25 i r 5.0 ua at rated dc blocking voltage @ta=100 500 maximum reverse recovery time (note3 ) t rr 150 250 500 ns typical junction capacitance (note 2) cj 12 pf typical thermal resistance junction to ambient(note 1) r ja 65 k/w operating temperature range t j - 55 to + 150 storage temperature range t stg - 55 to + 150 note: 1. leads maintained at ambient temperature at a distance of 9.5mm from the case 2. measured at 1.0 mhz and applied reverse voltage of 4.0v d.c 3.reverse recovery test conditions: if=0.5a, ir=1.0a, irr=0.25a . version:a0 1of2 www.sddydz.com
kmb22m thru KMB225M version:01 fig. 5-typical transient thermal impedance 2 of 2 1.2 0.8 0.4 0 0 25 50 75 100 125 150 175 fig. 2-maximum non-repetitive peak forward surge current fig. 1- forward current derating curve average forward rectified current, amperes peak forward surge current, amperes single phase half wave 60hz resistive or inductive load 0 20 40 60 80 100 1,000 100 10 1 0.1 0.01 tj=100 c tj=25 c percent of peak reverse voltage,% fig. 4-typical reverse characteristics instantaneous reverse current, microamperes ambient temperature, c 30 20 10 0 number of cycles at 60 hz 1 10 100 8.3ms single half sine-wave (jedec method) 0.01 0.1 1 10 100 100 10 1 0.1 t,pulse duration,sec. transient thermal impedance, c/w fig. 3-typical instantaneous forward characteristics instantaneous forward current,amperes instantaneous forward voltage, volts 0.2 0.5 0.7 0.9 1.1 1.2 0.01 0.1 1 20 10 t j =25 c pulse width=300 m s 1%duty cycle 1.6 2.0 40 50 60 kmb22m-kmb245m kmb25m-kmb26m kmb28m-kmb210m kmb215m-kmb220m KMB225M www.dyelec.com 1f1 thru 1f7 version:a0 2of2 www.sddydz.com
|
